PROLOGIX_EOI

Sets the EOI and EOS settings for the Prologix GPIB-USB adapter. Only used for the GPIB port (not the serial port). These settings depend on the instrument you are using. EOI - end of interrupt (use terminator or not) EOS - end of string (termination character) Requires an OPEN_SERIAL block. Params: connection : Serial The open serial connection with the instrument. eoi : bool Use EOI (1) or not (0). eos : select Which terminator to use. Returns: out : String Response from the Prologix USB-to-GPIB controller.

Python Code

import serial
from flojoy import flojoy, SerialConnection, DataContainer, String
from typing import cast, Optional, Literal


@flojoy(inject_connection=True)
def PROLOGIX_EOI(
    connection: SerialConnection,
    default: Optional[DataContainer] = None,
    eoi: bool = True,
    eos: Literal["CR+LF", "CR", "LF", "None"] = "None",
) -> String:
    """Sets the EOI and EOS settings for the Prologix GPIB-USB adapter.

    Only used for the GPIB port (not the serial port). These settings depend on
    the instrument you are using.

    EOI - end of interrupt (use terminator or not)
    EOS - end of string (termination character)

    Requires an OPEN_SERIAL block.

    Parameters
    ----------
    connection: Serial
        The open serial connection with the instrument.
    eoi: bool
        Use EOI (1) or not (0).
    eos: select
        Which terminator to use.

    Returns
    -------
    String
        Response from the Prologix USB-to-GPIB controller.
    """

    # Start serial communication with the instrument
    ser = cast(serial.Serial, connection.get_handle())

    if ser is None:
        raise ValueError("Serial communication is not open")

    if eoi:
        cmd = 1
    else:
        cmd = 0

    match eos:
        case "CR+LF":
            eos = 0
        case "CR":
            eos = 1
        case "LF":
            eos = 2
        case "None":
            eos = 3

    ser.write(str(cmd).encode())

    cmd = f"++eos {eos}\n"
    ser.write(cmd.encode())
    s = ser.read(256)

    return String(s)

Find this Flojoy Block on GitHub

Example

Having problems with this example app? Join our Discord community and we will help you out!

Press enter or space to select a node.You can then use the arrow keys to move the node around. Press delete to remove it and escape to cancel.

Press enter or space to select an edge. You can then press delete to remove it or escape to cancel.

Download this Flojoy App

This app prepares the Prologix GPIB-USB adapter for use with a VISA instrument. The user can then send a SCPI command to a VISA instrument using the GPIB-USB adapter.

Parameters:

• Connection on all of the Blocks should be the COM port of the adapter.
• PROLOGIX AUTO: auto = off
• PROLOGIX MODE: mode = CONTROLLER
• PROLOGIX EOI: EOI = true, EOS = None (instrument dependent)
• GPIB address should match the instrument’s (see the instrument’s manual on how to find it)
• OPEN SERIAL: writing “*IDN?” with bytes encoding and a LF terminator

This app has two rows that are run seperately:

1. The top, setup, row with AUTO, MODE and EOI blocks.
2. The bottom row with WRITE and READ.

The two constants on the bottom left control which row runs. If they are equal, the setup row runs. Otherwise, the read/write row runs. The setup should be run before connecting the adapter to the instrument.

Note that the PROLOGIX READ should be used to recieve a response from the instrument. The AUTO mode can be turned on which recieves a response upon every command (PROLOGIX AUTO block controls this setting). However, this causes errors in some VISA instruments.