Connecting to Keysight N3300A by Keysight in Python

Instrument Card

The Keysight N3300A is a full-rack width mainframe with 6-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration. The N3300A holds up to six N3302A, N3303A, N3304A, N3307A load modules, or three N3305A, N3306A double-wide modules, allowing a total up to 1,800 watts of maximum power.

Device Specification: here

Manufacturer card: KEYSIGHT

Keysight Technologies, or Keysight, is an American company that manufactures electronics test and measurement equipment and software

• Headquarters: USA
• Yearly Revenue (millions, USD): 5420
• Vendor Website: here

Connect to the Keysight N3300A in Python

Read our guide for turning Python scripts into Flojoy nodes.

Flojoy

PROTOCOLS > SCPI

📄 IDN

Query a device's identity through the universal *IDN? SCPI command.

📄 MEASURE VOLTAGE

Query an instrument's measured output voltage, such as a DMM or power supply.

📄 SCPI WRITE

Write a SCPI command to a connected bench-top instrument and return the result.

QCodes Community

To connect to a Keysight N3300A Electronic Load using Qcodes Community, you can use the following code:

from qcodes.instrument_drivers.Keysight.Keysight_N3300A import Keysight_N3300A

# Create an instance of the instrument
load = Keysight_N3300A('load', 'TCPIP0::192.168.1.1::inst0::INSTR')

# Connect to the instrument
load.connect()

# Now you can use the instrument to perform operations
# For example, you can set the load current
load.current.set(1)  # Set the load current to 1 Ampere

# Disconnect from the instrument
load.disconnect()

Note: Replace 'TCPIP0::192.168.1.1::inst0::INSTR' with the actual VISA address of your Keysight N3300A Electronic Load.